1. Disconnect the cable from the negative post of the battery.
2. Remove the drivebelt.
3. Remove the coolant reservoir.
4. Disconnect both of the small electrical connectors to the alternator.
5. Remove the alternator mounting bolts (two underneath and one above) lift the alternator out. Pull back the rubber cover from the B+ terminal nut and disconnect the B+ terminal cable.
6. Installation is the reverse of the removal steps.
If you have all of the tools it should take about 30 min.
how to change alternator in acura 1999 cl
On top nearest to the firewall on the passenger side
Remove the belt from your 1999 Chevrolet Malibu alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining nuts. Reverse the process to change to the new alternator.
dsdfsd how to change a fuel pump on a 1999 ford escort zx2
Remove the belt from your 1999 Chevy Malibu alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
because it was not good
Begin by removing the belt from your 1999 Mercury Mystique alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
a very big hammer
ask your Dr for a med for high blood pressure and test you blood pressure
First to change the alternator: *Take out the oil carbronater *Then clean out the exhaust pipe *Take the alternator and clean what is dirty, then you don't need to change it, because now it's clean!
Remove wiring harnesses, unbolt it, remove from engine. Install new alternator, apply tension using bar, bolt it, hookup wiring harnesses.