Here is a link for the 1995 Mazda 626 belts. :
on the alternator on top is a bolt losen that bolt and it will allow you to move alternator causing belt to losin
you have to loosen the top alternator bolt alowing the alternator to swing forward loosening the belt
you have to loosen the top alternator bolt alowing the alternator to swing forward loosening the beltThis answer was retreived from the previous page
To change the alternator belt on a Mazda 323, first remove the right hand air shield under the can. Then locate the pulley tensioner of the AC and loosen the bolts on the pulley. Finally, remove the alternator pivot bolt under the alternator to remove the old alternator belt and replace with a new one.
i need to change my alternator belt and don't know where the tension wheel is so i can take off the other belt to replace the alternator belt on my 94 Mazda protege 1.6l
What bolts to loosen to put alernator belt on and how to put it on when a/c belt is on.
Not difficult at all. You just need to loosen the tension bolts and pull it out. DJ FLIP Housepartykings.com
what is the engine size?
To change the alternator belt on a 1998 Mazda 626 you need to first loosen the bolt that is located in the center of the adjustment pulley. Next, turn the adjustment bolt to the left until the belt is loose and can be removed. Reverse the steps to replace with the new belt.
how do u replace alternator belt on 2002 mazda protege 5 stationwagon
To change the alternator drive belt on a Bobcat 853 you start by lifting the cab. With the cab up, you can see the back of the engine and alternator. Locate the belts spring tensioner and release the belt.
Remove the wiring harness from the back of your 1995 Chrysler LHS alternator. Remove the alternator belt. Remove the alternator retaining bolts. The alternator will come off and can be replaced with the new alternator.
Remove the power steering belt first then the alternator belt will go on.
loosen the power steering pump pull that belt loosen the alt and remove belt and replace
when do i change a cam belt on a mazda 2
how do you change 2004 kia sorento alternator belt
Loosen the alternator tensioner bolt. The alternator belt will become loose. Remove the alternator belt. Put the new alternator belt on and reverse the process.
The 1.8 litre four cylinder engine in a 1995 Mazda Miata has a timing BELT
Disconnect the battery Remove the engine covers to access the alternator drive belts. Remove the electrical connections from the alternator. Slacken the bolts, remove the belt. Remove bolts, put new alternator on, tighten bolts until you can just move alternator, fit new belt, move alternator so the belt is tight and then tighten bolts to their specified torque.
The alternator on a 1995 Volvo 960 is changed by disconnecting the negative battery post, removing the alternator wiring harness, loosening the retaining bolts, and taking the belt off. The alternator can then be completely unbolted and a new alternator put in its place.
undo the positive battery terminal loosen alternator bolts undo tensioner to get belt loose pull alternator down and out repeat directions tighten belt bolts bolt battery terminal...
You have to remove the power steering belt and the AC belt to remove the alternator belt.
Reasons: Cheap Belt Too tight
Take it to a mechanic.... use a 12 mm extended ratchet to loosen the accessory belt tensioner (remove belt) Unbolt the alternator from the engine chassis and unplug the positive and negative terminals. New Alternator Costs about $200, New Starter Costs the Same.
Begin by removing the alternator tensioner bolt. Slide the alternator to the left. Remove the alternator belt. Reverse the process to install the new alternator belt.
Ask questions, submit answers, leave comments
Earn points for using the site
Customize your profile
Already have an account? Log in