To replace the alternator belt on a 1995 Mazda MX-6, first disconnect the negative battery terminal. Then, locate the alternator and loosen the adjusting bolt and the mounting bolts to create slack in the belt. Remove the old belt and install the new one, ensuring it sits properly on the pulleys. Finally, adjust the tension of the new belt, tighten the bolts, and reconnect the battery terminal.
you have to loosen the top alternator bolt alowing the alternator to swing forward loosening the belt
To replace the alternator on a 1995 Mazda Miata, first disconnect the negative battery cable to ensure safety. Remove the serpentine belt by loosening the tensioner, then unbolt the alternator from the engine. Disconnect the electrical connections from the alternator, install the new alternator, reconnect the electrical connections, and reattach the serpentine belt. Finally, reconnect the battery cable and start the engine to test the new alternator.
you have to loosen the top alternator bolt alowing the alternator to swing forward loosening the beltThis answer was retreived from the previous page
how do u replace alternator belt on 2002 mazda protege 5 stationwagon
Remove the power steering belt first then the alternator belt will go on.
To replace the alternator on a 1995 Honda Civic disconnect the battery. Disconnect the wiring from the alternator. Loosen the adjustment bracket so the belt has slack. Remove the alternator belt along with the mounting hardware. Pull the alternator and replace it.
on the alternator on top is a bolt losen that bolt and it will allow you to move alternator causing belt to losin
To replace the alternator belt on a 1995 Mazda Millenia, first disconnect the negative battery terminal for safety. Loosen the tensioner pulley by turning the adjustment bolt counterclockwise, then remove the old belt by carefully slipping it off the pulleys. Install the new belt by following the same path as the old one, ensuring it sits properly on all pulleys, and then re-tighten the tensioner. Finally, reconnect the battery terminal and check the belt tension before starting the engine.
i need to change my alternator belt and don't know where the tension wheel is so i can take off the other belt to replace the alternator belt on my 94 Mazda protege 1.6l
To replace the alternator belt on a Mazda Miata, first, ensure the engine is off and cool. Remove the plastic cover if applicable, then loosen the tensioner bolt and the alternator mounting bolts to relieve tension on the belt. Slide the old belt off the alternator and pulleys, then install the new belt, ensuring it's properly seated. Finally, tighten the alternator and tensioner bolts to restore tension, and check the belt alignment before replacing any covers.
To change the alternator belt on a Mazda 323, first remove the right hand air shield under the can. Then locate the pulley tensioner of the AC and loosen the bolts on the pulley. Finally, remove the alternator pivot bolt under the alternator to remove the old alternator belt and replace with a new one.
Take it to a mechanic.... use a 12 mm extended ratchet to loosen the accessory belt tensioner (remove belt) Unbolt the alternator from the engine chassis and unplug the positive and negative terminals. New Alternator Costs about $200, New Starter Costs the Same.