Here is a link with detailed informations and step by step pictures on how to change the antenna http://www.carstereohelp.com/stereoremovalToy4Runr2PwrAnt.htm
how can i change the antenna base on ford focus its broken Remove the maplight cover and bulb housing. There is a single screw that secures the antenna base.
To Change the antenna, its best to remove the right front tire. Then remove the plastic wheel well cover and wella, the antenna can be easily replaced.
To change the radio antenna on a 1986 Jaguar, first, locate the antenna base, usually mounted on the front fender or rear of the vehicle. Disconnect the power and antenna cable from the base, then unscrew the antenna from its mount. Install the new antenna by securing it in place, reconnecting the cable, and ensuring a proper electrical connection. Finally, test the radio to confirm that the new antenna is functioning correctly.
You can't unless you wan to replace the windhield. The antenna is built into the windshield.
== == How do I get instructions on replacing a power antenna on a 2004 corvette convertible?
To change the antenna cable on a 1998 Buick LeSabre Limited, a person has to unscrew the old antenna cable from the back of the radio. Then pull the antenna wire out from under the dash and follow it to the antenna. Unscrew the old cable from the antenna. Screw in the new cable and thread it back under the dash in the same path as the old cable and screw it to the back of the radio.
To change the radio antenna on a 2002 Toyota Sequoia, first, remove the plastic cover at the base of the antenna by gently prying it off. Then, unscrew the antenna from the mount using a wrench or pliers. Once removed, replace it with the new antenna by screwing it onto the mount and reattaching the plastic cover. Finally, test the radio to ensure it's functioning properly with the new antenna.
This procedure is done exactly the same as you would change a monaural antenna.
I believe you have to take off the Wheel Well liner and access to access the antenna.
Remove the wiring harness from the bottom of your 1987 Buick Regal power antenna. Remove the power antenna retaining nuts. The power antenna will come off. Reverse the process to install the new power antenna.
To change the antenna on an Infiniti G2 2002, locate the antenna base on the exterior of the vehicle. Unscrew the old antenna and disconnect it from the wiring. Attach the new antenna to the wiring and screw it into place on the antenna base.