0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How to change brake pads and rotors on 97 land rover?
Check out this post: http://www.mavromatic.com/2007/03/diy-part-i-replacing-rear-rotors-and-brake-pads-on-a-land-rover-discovery-ii/
What is the average life of brake discs?
On my 2007 Sonata I had to replace the brake pads and rotors at 57000 miles.
How much does it cost to change the rear brake pads and rotors in a 2007 Lexus ES350?
It is about one hour of labour. So depends on your labour cost.
What is the price to change front brake pads and resurfacing on a 2007 Toyota sienna?
i just had the northridge Toyota resurface the rotors and changed the brake pads of my 05 sienna for 199+ tax... they are having some kind of brake special going on.
When to change Toyota corrolla 2007 rotors?
They have a wear limit on them. You can find out from just about any brake shop, or the dealer. Most shops will not turn the rotors (use a metal tool to straighten out the surface) once they are worn beyond the wear limit.
Would the rotors from a 1999 Montana fit a 2007 Town and Country?
The brake rotors for the 1999 Montana and 2007 Town & Country are different part numbers and different dimensions; therefore they will not interchange.
How do you change brake pads on Toyota tacoma 2007?
How do I change the brake pads on Toyota tacoma 2007
When you hit the brakes your steering wheel shakes on a 2007 Pontiac grand prix?
Your brake rotors are warped.
Replace brake pads and rotors on a 2007 f150 super crew cab?
how to replace rea pads on 2007 crew cab f150
Why does a 2007 Dodge Grand Caravan needs brake pads and rotors changed at 16000 already?
Aggressive driving.
Gas pedal vibration in 2007 Hyundai tuscon?
Hard to say but likely brake rotors need replacing
Change brake rotors on 2007 Toyota solara?
And the question is? ;) If you're asking if the rotors can be changed the answer is yes. If you're asking how to change the rotors the answer is almost as simple. 1. Jack the car up and place a jackstand underneath for safety 2. Remove road wheel(s) 3. Remove brake calipers (2 bolts each) 4. Suspend calipers by wire/rope/string, whatever you have so they aren't hanging by the hose. 5. Pull rotors off studs. They should just slide off easily. If the rears don't, be sure the parking brake is off (the brake shoe is integral to the rotor). 6. Reassemble in reverse order. If brake pads appear worn, you may as well replace them while you're in there. Cheers
