answersLogoWhite

0

== == You need to lift the vehicle using a lift, and observing all safety proceedures associated with this type of equipment. The drive shaft/CV joint must be removed. The transmission must be unbolted & seperated. Using a trans jack to support the trans, it must be rotated to give access to the pressure plate, clutch disk, throw out bearing & fly wheel. The disk/plate assembly must be removed, then the fly wheel. The fly wheel should by resurfaced at a machine shop. The fly wheel is then bolted back in place, the clutch & disk installed using a clutch alignment tool, then pressure plate bolts must be torqued to specs. slide the throw out bearing onto the shaft & reassemble. If you're not up to this, you'll need to take it to a shop. Be prepared to pay 600.00-1,000.00 dollars US for this. It's a pain, I've done it twice (high performance clutch & fly wheel kits in my performance Tib).

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Where is the iat sensor located on a 2003 Hyundai tiburon 2.0l four cylinder?

tiburon 2.0 Intake air temperature (IAT) sensor lokation?


Do you have to remove the bolt from the clutch arm before the transmission will release in a 2003 Hyundai Tiburon?

Yes, in a 2003 Hyundai Tiburon, the bolt securing the clutch arm must be removed to allow the transmission to release properly. This step is necessary to ensure that the clutch disengages fully, facilitating easier removal of the transmission. Always consult the vehicle's service manual for specific instructions and torque specifications when performing this task.


What is the manual transmission fluid capacity for a 2003 Hyundai tiburon?

The manual transmission in a 2003 Hyundai Tiburon requires 2.3 quarts of gear oil.


What type of oil is used for a 2003 Hyundai Tiburon GT V6?

The answer is use 10W-30 for engine oil in the 2003 Hyundai Tiburon GT.


Is a 2007 Hyundai Tiburon window motor compatible with a 2003 tiburon?

no but its is with the 2005 -2007


Where the throttle on a 2003 Hyundai tiburon?

The left pedal.


How much cost to replace starter on a 2003 Hyundai tiburon?

The cost to replace a 2003 Hyundai Tiburon ranges from $70 to $110. This is dependent on the store and part brand.


2003 Hyundai Tiburon wiring diagram?

need wiring diagram 03 Hyundai tiburon; headlight fuse keeps blowing out.


How can you replace a door handle on a 2003 Hyundai Tiburon?

The 2003 Hyundai Tiburon has door handles that sometimes break or need replaced. They can be easily removed and replaced with a new part.


Where can a person purchase a 2003 Hyundai Tiburon?

You can purchase a 2003 Hyundai Tiburon from AOL Autos. Alternatively, you can purchase this vehicle online from auction websites such as eBay or from classifieds such as Craigslist.


How many qts oil for 2003 Hyundai tiburon?

5


Does the 2003 Hyundai tiburon come with turbo?

Nope. But i can be added on aftermarket.