i did this today.. there are 2 screws ontop of the fog light, undo those and the whole light asembly comees out and you undo the back cover to get to the globe. that's it. i just cant find a replacement globe that looks the same.
bulb(s)
Have you checked your bulbs ? The tail light / brake light bulb has 2 wires inside it In my case I have had to change each bulb because the brake light portion did not work but the tail light portion of the bulb did ( I'm assuming that your front park lights are working )
their are 4 plastic nuts in the trunk that loosen the light assembly that the lights are in. Remove those and pull the assembly out and twist the connector for the license plate light to access the bulb.
Hazerds lights and blinkers done work
light bulb out on map light how to change with out breaking plastic lens
Of course, otherwise there would be no lights that worked.
bulb(s)
Well, from what i understand of your question i think you are askign how to change front brake lights and corner lights. These are headlights and corner lights, brake lights are located at the rear of the car. Pop the hoos, you should see the wiring that hooks up to the lights. Unscrew the plastic"shield" that protects the bulb and change the bulb place it back in and screw the light back into place. (i recommend checkign to make sure the light bulb works before putting it back in the whole light) Good Luck.
your bulb is faulty- replace it
light bulb lights up london
what are positioning lights on vw golf mk4
In the trunk you will find the break lights. Gently turn connecter to expose the bulb simply take out the bulb and replace.