its pretty easy really once you have the wheel off you take the breaks off. Then you will remove the bolts that hold the wheel bearing hub on> thy are usually put in backwards you will find the bolt heads on the backside of the hub> there are three of them. then remove the disconnect the anti-lock break plug.and remove the hub. if hub doesn't pop off find a 12" 2x4,and place it on the end of the Axel and pound the Axel inward,that should do the trick. after that's done simply put the new hub assembly on and don't forget to torque the Axel nut down to 95-100 ft pounds of torque. if you get it to tight you will be doing this again soon,
how do you change front wheel bearing for 420 rancher
Call your local auto parts store. Front wheel bearings can go from $50 to $200 (plus labor) depending on manufacture.
2 wheel drive, yes. 4 wheel drive, no.
When you change rotor or main ball joint, or when they get worn.
the front wheel bearings are a sealed unit, requiring a front hub assembly. when i bought mine it was a dealer item only
If you are referring to the front bearings, you have to buy a complete hub assembly.
how do i replace front wheel bearings on golf 1.6 2002 model
front hub removal dispatch
You can change the front wheel bearings on your 2000 Buick Regal without replacing the entire hub assembly. You can change each individual wheel bearing, if you choose.
sorry to have to tell you this but the bearings are part of the wheel hub and sealed within. you need to change the entire hub. $$$$$$$
Front or Rear? Both
screw driver