you must either purchase the made together socket and bulbs from a authorized speedometer shop, and then take the instrument cluster out to replace the socket with bulb made together. or just pay the speedometer shop to do the job for you. just remove the band around the cluster and cup holder.
then use a 7mm socket to remove 4 screws from the cluster and pull it out.
turn it over and you can see the backside of the light sockets just twist and pull them out you must replace the whole socket and bulb together because they are made together.
1993 chevy 4.3 v6 1500 truck temp gauge inoperative,
how do i change the spark plugs on a Chevy silverado 1500
How do I replace the heater core in a Chevy express 1500
fuel sending unit is bad
no
195 to 210 is normal
If the cubic inch is the same the motors should swap out ok. You will have to change some parts but most Chevy motors will swap.
go to macanic
Open the tail gate and look at were the straps that hold the tail gate are at on the sides of the bed. Now look at the 2 Phillips screws and remove them then the light will come out.
10 gauge will suffice.
It's on the side of the motor
Starter solenoid?