Want this question answered?
change bulb on ford kuga
take it to a trained mechanic?
HI, see "You Tube" where there is a short video showing how to change a Puma headlight bulb
look under the hood behind the light,There is a clip that holds the bulb in
According to the 2005 Ford Expedition Owner Guide : Low beam headlamp ( # 9006 bulb ) High beam headlamp ( # 9005 bulb )
how to change headlamp bulb on rover 25
h11 i believe.
Remove the two torque type mounting screws from the headlamp and gently move the headlamp out of the way, Power cable to headlamp can be removed but not needed. Easy access to fog lamp bulb is then achieved. Disconnect fog lamp power cable and twist bulb to remove.
You cant just change the bulb, you have to change the whole headlamp.
Removal WARNING: The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope. NOTE: The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an extended period of time may effect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn on the headlamp with the bulb removed from the headlamp. # NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position. Disconnect the headlamp connector. # Remove the headlamp bulb. ## Rotate the headlamp bulb retainer counterclockwise one-eighth turn and remove. ## Remove the headlamp bulb.Installation CAUTION: Bulbs 9004 and 9007 look similar, but are not interchangeable. # Install the headlamp bulb. ## Install the headlamp bulb. ## Rotate the headlamp bulb retainer clockwise one-eighth turn.# Connect the headlamp connector.
Removal WARNING: The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope. NOTE: The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an extended period of time may effect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn on the headlamp with the bulb removed from the headlamp. # NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position. Disconnect the headlamp connector. # Remove the headlamp bulb. ## Rotate the headlamp bulb retainer counterclockwise one-eighth turn and remove. ## Remove the headlamp bulb.Installation CAUTION: Bulbs 9004 and 9007 look similar, but are not interchangeable. # Install the headlamp bulb. ## Install the headlamp bulb. ## Rotate the headlamp bulb retainer clockwise one-eighth turn.# Connect the headlamp connector.
To remove the headlamp bulb on a 1991 Chevrolet Caprice simply twist the retainer counterclockwise, remove the bulb from the headlamp capsule and unplug the bulb from the wiring connector. To install the new bulb plug it into the wiring connector, insert the bulb into the headlamp capsule and twist the retainer clockwise and you're finished.