How do you change headlight assembly Toyota Camry?

Answer 1

You can click on the information on the right and it will take you through each procedure.

http://www.toyotaownersonline.com/parts-service/diy.html

The info at the link (above) is for simple maintenance items (headlight BULB, not headlight ASSEMBLY), specifically: Air Filter, Battery, Bulb, Distributor Cap, Dome Lamp, Engine Oil & Filter, Fuel Filter, PCV Valve, Radiator Hose, Spark Plugs, Thermostat or Wiper Insert



to REPLACE a Headlight Assembly for a 1996 CAMRY, follow these directions:

1. open hood
2. remove 2 (10mm) bolts that attach the center grille trim to the headlight assemblies.
3. remove the (phillips) screw that attaches the "corner light" to each headlight assembly
4. gently pry the corner light off by inserting a thin plastic blade between the corner light and the headlight assembly where they meet at the FRONT of the vehicle -- PRY TOWARDS THE SIDE of the vehicle, once the screw was removed (#3 above) it is just a "snap fit" that holds the corner light in place.
5. disconnect the headlight electrical connections (2 each) on each headlight assembly
6. remove the 10mm nut that was covered by the corner light
7. remove the remaining 10mm bolts holding the headlight assembly in place
8. remove the headlight assembly - VOILA!
9. RE-ASSEMBLE in reverse order. 15 minutes for each side (includes drinking a beer to celebrate).