0
How do you change high temperature refrigerant and high pressure refrigerant in to low temperature refrigerant and low pressure refrigerant?
BirukSisayfb8272
You cool it and run it through a metering devise.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Does refrigerant exit the compressor as a high temperature high pressure liquid?
No , a high temperature high pressure ( gas )
What does the condenser do in a refrigeration or air conditioning system?
It passes heat out of the high pressure high temp vaporized refrigerant so the it becomes a high pressure lower temperature liquid.It passes heat out of the high pressure high temp vaporized refrigerant so the it becomes a high pressure lower temperature liquid.
What is the component of a refrigeration which change a high pressure vapor to a high pressure liquid?
as heat is removed from the refrigerant at the condenser it reach it saturated temperature n then it'll start to flash change state to a high pressure liquid LBMDOLPH-CHECKMATE on soundcloud
What is a brief description of the basic refrigeration cycle?
Starting at the compressor;Low pressure vapor refrigerant is compressed and discharged out of the compressor.The refrigerant at this point is a high temperature, high pressure, superheated vapor.The high pressure refrigerant flows to the condenser by way of the "Discharge Line".The condenser changes the high pressure refrigerant from a high temperature vapor to a low temperature liquid and leaves through the "Liquid Line".The high pressure refrigerant then flows through a filter dryer to the Thermal Expansion valve or TXV.The TXV meters the correct amount of liquid refrigerant into the evaporator.As the TXV meters the refrigerant, the high pressure liquid changes to a low pressure, low temperature, saturated vapor.This saturated vapor enters the evaporator and is changed to a low pressure dry vapor.The low pressure dry vapor is then returned to the compressor in the "Suction line".The cycle then starts over.
Does refrigerant enter the compressor as a low temperature low pressure gas?
Yes. The basic components of the refrigeration system are the refrigerant, compressor, condenser and receiver, expansion device and the evaporator. One cycle: Refrigerant travels to Compressor (A) to Condenser (B) to Expansion device (C) to evaporator (D). The refrigerant gas at low pressure and temperature is drawn into the compressor. The gas is compressed to a higher pressure, which causes an increase in the temperature. The refrigerant gas at a high pressure and temperature passes to the condenser (point B), where it is cooled (the refrigerant gives up its latent heat) and then condenses to a liquid. The high pressure, low temperature liquid is collected in the receiver. The high pressure liquid is routed through an expansion valve (point C), where it undergoes an abrupt reduction in pressure. That pressure reduction causes part of the liquid to immediately vaporize or flash. The vapor and remaining liquid are cooled to the saturation temperature (boiling point) of the liquid at the reduced pressure. At this point most of the refrigerant is a liquid. The boiling point of the liquid is low, due to the low pressure. When the liquid refrigerant enters the evaporator (point D), it absorbs heat from the process and boils. The refrigerant gas is now at low pressure and temperature, and enters the suction side of the compressor, completing the cycle.
Which refrigerant is considered high or very high pressure refrigerant?
r 134-a
High pressure and high temperature cause rocks to?
High temperature and pressure can cause rocks to change their forms. This is known as metamorphic.High pressure and high temperature can cause rocks to change forms. This is known as metamorphic.
What role does a compessor play in a refrigeration system?
In vapour compressor refrigeration system the low pressure and temperature vapour refrigerant from evaporator is compressed. where it is compressed to a high pressure and temperature. From compressor refrigerant goes to condenser where where it changes the phase. from condenser refrigerant goes to evaporator through expansion device.
What happens when refrigerant enters the condenser?
what happens when refrigerant enters the condenser
What could cause a gaseous substance to liquefy?
A change in temperature, pressure, or volume (all three are related via gas laws)Example:The refrigerant in an air conditioner/refrigerator regularly condenses and vaporizes as the unit operates
When graphite is subjected to very high temperature and pressure does it change to a diamond?
Graphite has its own atomic structure of its basic carbon atoms. Subjecting it to very high temperature and pressure would not change its structure. Carbon, when subjected to very high temperature and pressure can be crystallized into diamond structures.
What does AC compressor do?
Cycles refrigerant through the system and changes the state of the refrigerant from a low pressure vapor to a high pressure vapor.
