Remove valve cover, 2 wires from injector, the fuel line coming from the fuel rail to injector, the lock nut on the head where you just removed the fuel line from, put a nut on injector tube and use a pry bar to pop out the tube, remove the rocker arms (do not mess with adjusting screws) only take out center bolts 10mm, remove 2 8mm hold down bolts on injector, put pry bar under injector hold down and pop intector out. Follow these instructions in order
My best advice, born from owning quite a few Cummins' powered vehicles, is to take it to a Cummins mechanic. If the pressures through the fuel system gets out of sync you can burn up the injector pump and then not only are you replacing the injectors, the pump and the lift pump. Mucho donero...
you just change it you just change it
A 2005 5.9L Cummins is what fits.A 2005 5.9L Cummins is what fits.
the 2005 Dodge Cummins stock horsepower is 325
i know with diesel engines if you run out of diesel, or change any part of your fuel line you will need to bleed your injectors to get it to run. you may have to bleed them all before it will run.
12 quarts
325 Hp 610 Tq
Auto : 48re Manual : G56
It is in the fuel tank.
The fuel pump on a 2005 Ram with a Cummins is not adjustable. If you want more power or smoke you need to purchase and instal a programmer.
11.5-1211.5-12
If it smokes without a "chip" it might have a failed injector.