Sorry friend but if ya have to ask a question like that your best to take it to a mechanic, it will save you headaches and money in the long run. But if you insist go to your local auto parts store and pick up a service manual for 15-20 bucks. tells ya everything ya need to know
If you need more detailed instructions than this don't try it. Remove the front valve cover. remove the two front bolts from the rear valve cover. disconnect all attachments and bolts from the intake manifold, coolant, vacuum, fuel, electrical. lift the manifold out front side first so it slips out from under the rear valve cover. cut the gaskets in pieces and glue them to the cylinder heads. Glue the cork strip gaskets in place. Use a form-a-gasket sealant at the four top and bottom corners of the manifold. Don't forget, one electrical line runs under the intake manifold.
Take pictures before starting and during the job for reference. Now if you can find all the pieces put it back together. 81 and still turning nuts and bolts.
You will need a intake manifold set and possibly a plenum gasket set.
It is the Intake Manifold Gaskets FYIilikebananas
No
theres no way you can change the head gaskets without taking off the intake manifold, its not hard to do. plus if your going to change the head gaskets it would only be smart to change the intake gaskets also.Answerand if your talking about the exhaust manifold, you did'NT specify, I'm sure you can but it will be no fun at all, plus u should change exhaust gaskets if your going to do all that work anyways so you don't have to worry about them down the road.
The year, engine size and if it is the intake manifold or an exhaust manifold gaskets would help.
Yes they do at the intake manifold gaskets.
what is your question
you do not need to remove intake manifold to change valve cover gaskets. intake bolts to the block. valve covers bolt to the heads EDIT: Theirs some clearance issues but you can maneuver the valve cover out.
please provide information on how to replace/install intake manifold on 1979 jeep cj7
head gaskets blow and intake manifold gaskets break
yes
Theoretically, under normal operating conditions, and proper maintenence, intake manifold gaskets should last for the entire life of the vehicle. To my knowledge, there is no prescribed routine replacement interval for intake manifold gaskets. Of course anytime a head(s) is removed, then new gaskets should be used in reassembly.