Want this question answered?
It is one big peice that must be removed. If you open the trunk, look on the inside of the lid behind the license plate, and you will find a few nuts that once removed, will allow you to remove the entire rear facia panel that the license plate bolts to and which houses the "PONTIAC" lights.
to wire the license plate lights you must have lights and wire them to the scooter.
No, the license plate light is wired in with the rear tail lights, not the brake lights.
The license plate lights are not in a separate fuce by it seft. They are the same as your side marker lights. So, check if your side marker lights are working and if they are them is a bad license plate light bulb.
yes 2002 Ford Focus do have 2 lights on license plate
You can remove the panel inside the back of the car. From there you can access your tail lights and your tag lights.
194
look for a blown in line fuse, 3 prong red box by back lights.
That would be the lights that illuminate the rear license plate.
There are plastic bulb covers on either side of the license plate. Unscrew the screws and take the covers off. From there you can insert new bulbs.
Check fuses. Do parking, tail, license plate lights work? same fuse could be rheostat to adjust dim to bright is broken
You need to remove the liner on the trunk lid. That will give you access to the license plate lights housing. Remove the sockets by twisting 1/4 turn and replace bulbs. Size for bulbs are 2825