Want this question answered?
If same engine and transmission model, yes.
The first step on how to change the motor on a 1992 Chrysler LeBaron V6 3.0l is to position the vehicle to where you can get the hoist in and out.
First unplug the wire harness from the switch. Using the correct size socket (1" if I remember correctly) remove the switch counterclockwise from the transmission. Install the new one in reverse order.
should do.. Check the VIN Number, the 1993 and 1994 can be replaced without restriction, but if the production date is earlier, change the newer TCM module, too (even if it works with the older one, but the newer are better and your car will use less petrol
You pull the old one out and push a new one in.
13/16 inch
It does not have a transmission belt.
13/1613/16
No, the engine doesn't have to be pulled to change the water pump.
You remove them one at a time, and install the new one the same way.
See Chilton No 20384! You must calculate at least 7 h if you are experienced (and up to 40 hours, if not !!)! You have to remove the wheels, brake disk, brakes to remove the transaxles first, then you must remove all tubes from top to get access to the screws. The Transmission is to remove to the bottom.
They went from the hide-a-way lights to the molded lens in 1993.