answersLogoWhite

0


Best Answer

I think you may want to read the following before you try to drain the oil on your 2010 Tundra if you have a 5.7L engine: I've answered this question several times:

-----------------------------Heres my answer to the question---------------Where do you get the oil filter wrench for the 5.7 L Toyota?----------------------

I had a conversation with the parts man at my Toyota dealer today I asked the same question. I also own a 2008 5.7 Tundra.

First of all, if you found the oil filter you know how hard it is to get to. (Drop the skid plate.) then you discovered that there was no ordinary oil filter like you've ever seen before. And finally you got to the paper filter after removing the oil cover plate.

Well the parts man told me that you can't just purchase the tool to remove the filter it's a special tool that you can only get through MAC tools. You know the guys that drive the big white tool trucks, and it's expensive. NO ONE ELSE SELLS THE TOOL! NO ONE!

So I've decided to let Toyota do the oil changes. $80 and they rotate the tires too.

I'll bet you can't find the transmission dip stick either. Because there is NONE. Something else new to confuse you. They told me that the 5.7 tranny is designed to go 100,000 miles before an oil change in the tranny. The tranny must be brought up to a special temp and a special tool has to be used to check it and fill it. (Frustrating isn't it.) Something else that I decided to let Toyota do. I'll bet you looked in the owners manual to find out where the oil filter and tranny dipstick is, and could not really find anything. (Right) I also looked.

If you look in the manual to find how to change the "CABIN filter" (Bet you didn't know there was one) you won't really find anything either. It's easy, it behind the lower glove box. Open the Box, Remove the brace on the right side. Squeeze the sides of the box inward a little and pull it out. You will see a trap door. Open it and pull out the cabin air filter and replace it. Instructions come with it when you buy a new one at any auto store. (Cost about $25) Toyota charges $58 to do this same thing.

I've resigned myself to checking the air in the tires. Oh wait, the 2008 also does that automatically. The reset tire button is under the dash by your right knee. (Sigh!)

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you change oil filter on a 2010 Toyota Tundra?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What size engine does the 2010 Toyota Tundra have?

The 2010 Toyota Tundra has a V6 engine.


How many valves does the 2010 Toyota Tundra have?

The 2010 Toyota Tundra has 24 valves.


Is the 2010 Toyota Tundra electric or gas?

The 2010 Toyota Tundra is a gas-powered vehicle.


How tall is the 2010 Toyota Tundra?

The height of the 2010 Toyota Tundra is 6 ft. 3.8 in. (75.8 in.).


What kind of transmission does the 2010 Toyota Tundra have?

The 2010 Toyota Tundra has a 5-speed shiftable automatic.


What kind of fuel does the 2010 Toyota Tundra use?

The 2010 Toyota Tundra runs on regular unleaded.


How long is the 2010 Toyota Tundra?

The 2010 Toyota Tundra is 17 ft. 5.8 in. (209.8 in.) long.


What is the turning circle of the 2010 Toyota Tundra?

The 2010 Toyota Tundra's turning circle is 39.2 ft..


What is the cam type of the 2010 Toyota Tundra?

The 2010 Toyota Tundra has double overhead cam (DOHC).


What ground clearance does the 2010 Toyota Tundra have?

The ground clearance of the 2010 Toyota Tundra is 0 ft. 10.2 in. (10.2 in.).


What is the drivetrain warranty on the 2010 Toyota Tundra?

The drivetrain warranty of the 2010 Toyota Tundra is 5 yr./ 60000 mi..


What is the base engine size of the 2010 Toyota Tundra?

The 2010 Toyota Tundra has a 4.0 L base engine size.