Go buy a new set. Pull one wire from the distributor cap, then from the sparkplug. Find one of the new ones the same length, put a little silicone lubricant on the rubber boot on each end and then put it in the distributor cap and then the spark plug. Do them one at a time and then the coil wire. It's really a very simple, easy job. Even my wife has done this a couple of times in her life.
According to my car mechanic this vehicle has coil overs, not plug wires.
You don't, the motor has spark packs for each cylinder. Take off the black plastic engine cover and you'll see.
1-3-4-2
change plug wires on 1998 isuzu hombre 2.2
Are you referring to spark plug wires
TTake them off ONE AT A TIME. If this is not enough information you need to take it to a garage.
The spark plug wires on your 1994 Chevrolet Caprice are quite easy to change. The spark plug wires simply lift off on each end. Put the new spark plug wires on and push until you feel a click.
No. However, newer plug wires can be extremely difficult to remove without damaging them.
I pretty sure that engine has coil on plug...so no wires.
To change the spark plugs and wires on a 1991 Mercury Capri, first, ensure the engine is cool and disconnect the negative battery cable. Remove the spark plug wires by pulling them off the plugs, taking care not to damage them, and note their order for reinstallation. Use a spark plug socket to unscrew and remove the old spark plugs, then install the new plugs, tightening them to the specified torque. Finally, attach the new spark plug wires according to the original order and reconnect the battery.
Are you wanting to know the order of the wires on the engine or the distributer cap?
Yes, if the spark plug wires can be connected to the distributor and works.