the same way youde change them on any other truck, the only difference is you take the outer wheel off first, then unbolt the hub that's hold that wheel on, then unbolt the next wheel, then its business as usual, i just got the same truck and was wondering but it really isn't that difficult once you take the wheels off
No. The body style changed in 1988.
You have to remove the trans. pan, and the selonoids will be right there . Bolted to the valve body.
The shoes were not changed and are soaked with brake fluid
Remove the tire and wheel from your 1995 Chevrolet K 3500. Remove the front brake assembly. Tap on the brake rotor with a hammer or mallet until it becomes loose. Slide the brake rotor off.
The tps is on the driver's side of the throttle body. The throttle body is mounted to the front of the intake, and has a cable going to it from the throttle pedal. When you push the pedal down the cable opens the valve inside the body.
c=2wd k=4wd
electronic spark timing is your distributor.
y65ue5
It is bolted to the rear of the transmission and the rear driveshaft slides into it.
0 degrees top dead center the computer will advance the timing as needed
Purchase a Purolator Cabin Filter. It comes with detailed instructions.
K3500 is a pickup truck; G3500 is a van.