0
No need to remove the engine mount. You are able to remove the right. front lower motor mount bolt and sleeve though the wheel well. Just turn the wheels far to the right, remove belt from alternator with tensioner, remove the plastic inner cover in the wheel well and use two long extensions on a breaker bar to remove the lower bolt only on the motor mount. Pull the bolt out and remove the sleeve next to the engine. With the sleeve removed you can install and route the new belt. Reinstall sleeve and bolt.
What else can I help you with?
1993 Pontiac Bonneville serpentine Belt?
diagram for serpentine belt on 1996 Pontiac Bonneville se
How do you change the serpentine belt on a 2003 Pontiac Bonneville?
To change the serpentine belt on a 2003 Pontiac Bonneville, loosen the tensioner pulley and remove the old belt. The tensioner pulley is the wheel in the belt system that has a bolt through the middle in a slot that can be adjusted. Put the new belt on and tighten up the pulley.
Can you get a shorter serpentine belt to bypass the airconditioner on a 1987 Pontiac Bonneville?
probably
Does the 2001 Pontiac Bonneville 3.8L V6 have the single serpentine belt?
yes
A diagram installing the serpentine belt on 1997 Pontiac Bonneville without super charger?
Yes, I need a diagram of the serpentine belt for a 1997 3.8 liter Bonneville SE without a turbo charger.
Where can you get a free diagram of serpentine belt on a 1992 Pontiac Bonneville?
advance auto if located in your area
How do you change the power steering fluid in a 1995 Pontiac Bonneville?
take off serpentine belt unbolt powersteering pump and hoses and drain it. That's it.
How do you replace a serpentine belt on a 1999 Pontiac Bonneville SSE?
just need to know where it is located on car
How do you change a serpentine belt for a Pontiac aztek?
Removing the serpentine belt on a Pontiac Aztek requires loosening the adjustment pulley. Once the pulley is loose the serpentine will have enough slack to come off.
How to replace serpentine belt on 1998 Pontiac Bonneville supercharger?
To replace the serpentine belt on a 1998 Pontiac Bonneville with a supercharger, first, ensure the engine is off and cool. Locate the serpentine belt routing diagram, usually found near the radiator or on the engine cover, to understand the belt's path. Use a wrench or socket to relieve tension on the belt tensioner, then remove the old belt. Finally, install the new belt following the routing diagram, ensuring it's properly seated on all pulleys before releasing the tensioner.
Is there a difference in a 1997 and 1998 Pontiac Bonneville serpentine belt?
there is no difference between the 2..to be sure when u go to the parts store have him check it out..
How do you replace a supercharger belt on a 1997 Bonneville?
You will need to remove the front engine cover, on your 1997 Pontiac Bonneville, in order to change the supercharger belt. Loosen the tensioner pulley to remove the belt.
