To change the front shocks on a durango the best way is to place the vehicle on a jack .The jack needs to be under the lower control arm behind the tire and jacked up off the ground and tire removed from the vehicle.Loosen up the lower bolts and remove [this takes an impact wrench or a breaker bar and some penetrating oil and a strong arm].
To change the rear shocks jack the rear of the vehicle off the ground and place jack stands under the frame of the vehicle in front of the vehicles rear tires...lower the vehicle to the jack stands and remove the top bolts to the shocks [springs will hold it up] then remove the lower bolts. Now replace the old shocks with the new shocks in the exact same way the old ones came off.Make sure the nuts and bolts are tightened until them can not be tightened any more usually takes an impact driver or a very strong arm.
how do i change to front brakes on a dodge durango?
How do you change shift cylinoid on 1998 dodge Durango
What size wrench do you need to change the front brakes on a 2001 dodge durango?"
Doesn't have one.
2003 Dodge Durango 4.7 how many quarts does it take when you change the transmission filter the trans
Dodge Durango was created in 1998.
The transmission on a 2006 Dodge Durango is changed by removing the drive shaft, disconnecting the linkage, and unbolting it from the engine. It can then be lowered from the vehicle and replaced.
Dodge Durango accessories can be obtained at any Dodge dealership. Accessories for a Dodge Durango can also be obtained online at websites such as Dodge Parts.
I have a 1999 dodge durango 4x4. oil was shooting out through a hose that came on the front axle I know that oil has
I am needing to change the transmission fluid on my 2001 Dodge Durango, and I don't know where the location of the plug to drain the transmission fluid is at!
25000 milee
Undo top & bottom bolts & nuts & replace shocks. No major knowledge or tools needed