Unscrew both philips screw and pop the side light.Then unplug the bulb and replace to a new one.
To change the light bulb on a Nissan Micra first lift the hood of the car. Find the headlight housings the pull the light bulbs from the ballast. Replace the bulbs.
The light assy has to be removed and the bulbs removed from the back.
This can be done 2 ways: 1 remove the turn signal lights and remove the 3 screws holding on the lights or 2 jack up the car and remove the 3 screws from the bottom, these are at the back of the lights.
You have to unbolt the entire tail lamp assembly to change the bulbs. Unbolt the tail lamps from inside the corners of the bed, replace the light bulbs, bolt the tail lamps back in place.
four wheel steering warning light
no
open your trunk to get access to your tail light, unscrew some plastic snap-on-screws to get to the panel that holds all your tail lights move the fabric uncling the panel CAREFULLY and change your burn bulbs
Take the fuse out or just unhook it from the modulator.
Behind the passanger side head light.
To change the head light bulbs on a 05 Nissan 350z. You have to remove the front wheel and inner fender liner. You then should have enough room to reach in and access the bulbs. It is a pain in the ass, I took me a hour to change out a burnt out turn signal bulb.
all you have to do is unbolt the whole fog light from it sides and undo the 4 screws on the back. the blub is a H3-55w
Yes. It is a direct fit. Nissan didn't change the rear hatch and they are interchangeable. 1984-86 won't have the third brake light. 1987-1989 will and you'll have to wire that in if you want it to be operable.