When doing this job, a filter and fluid change is recommended. Remove the transmission vale body cover. Do this slowly to drain off the fluid in one of the corners. The filter is mounted to the valve body. The two solenoids sit together in the valve body. Unplug the wiring harness from each solenoid They are held in by a clip, you may need a needle nose pliers to help remove these clips. The solenoid A will have some light spring pressure pushing it out after clip is removed. After removing the solenoids, check to make sure both valve move freely in the body. Take care not to scratch the valve spool, or body port. They should move very easily. If all moves, wipe fluid off vale body, clean gasket area, put everything back together.
Starter solenoid?
How is the easiest way to change a fuel pump on my k1500 Chevy pickup
on the starter
starter solenoid is connected to top of starter
The starter solenoid is part of the starter.
where is the transmission censor located on a 1997 Chevy cheyenne truck
I have a 1995 chevy 4x4 with 4l60e which is bad i have other 4l60e out of a 1997 chevy 4x4 will it work ?
Transmissions
yes
From truck to truck, yeah, they are the same.
the starter relay.
where is the pcm module located on my 1997 Chevy truck