1) Disconnect the wire harness from the ignition coils
2) use a 10mm socket to take off the bolts on the ignition coils
3) pull the plug boots out in pairs ( so you don't have to disconnect the wires)
4) remove spark plugs with standard spark plug tool(comes with most socket-sets)
5) gap new plugs to .04 with spark plug gapper
6) install new spark plugs (make sure they're tight, but you don't need to kill it)
7) put the plugs boots back (the wires 'click' on the plug, the coil boots don't 'click')
8) put the ignition coil bolts back in
9) reconnect the wire harnesses to the ignition coils
10) enjoy your sweet car!!
**NGK plugs are your best bet
**if you have any check engine lights, disconnect the battery for 5 minutes to reset the codes
The 2008 Lancer uses a 4 cylinder engine, therefore it uses 4 spark plugs.
Four.
when do you change spark plugs
02 lancer gaplook under the hood of your lancer for the specs, but the gap is .039-.042. With platinum plugs, a spark plug gap isn't necessary.
On the engine head !
To change the spark plugs in a 1997 astro van do I have to change the spark plugs from the bottom of the engine/
How to change the spark plugs
how to change spark plugs on a 2001 expedition
I have an 03 lancer es and in the owners manual it says 1.0-1.1 is the gap for the plugs
2002 galant , can't find the spark plugs
how do you change spark plugs on 1995 Lexus es300
1999 Volkswagen Beetle how to change spark plugs