jack car up better to use ramps .do from underneath .
Jack up vehicle and change the rear plugs from underneath!
You either reach around the top to them, or you reach them from underneath.
I reach over and around the top of the engine to access the spark plugs.I reach over and around the top of the engine to access the spark plugs.
that he must remove to get to spark plug rear of the cylinders
With a socket set :)
You rock the engine forward to gain access to the rear plugs.
yes. The frontal plugs are easy, but the rear plugs require you to get your hand up in the engine from underneath.
The front spark plugs are easy. To change the rear plugs the top mixing (plenum) chamber has to be removed. This involves removal of cables, electrical connectors, throttle body, vacuum hoses, & rear support brackets. Nasty job. Best left to a professional.
Unfortunately, this is not easy. You have to basically take everything off of the top of the engine, all the way down to the fuel rail, to be able to access the rear spark plugs.
you need to take the intake off to get to the back three plugs...
the spark plugs are located in the front of the engine and rear, just follow the spark plug wires and you will find the spark plugs
You will need to remove the spark plug wires on your Chevrolet 3.1 liter engine. Remove the spark plugs with a 5/8 deep well socket. Turn the socket to the left. The spark plugs will come out. Reverse the process to install the new spark plugs.