answersLogoWhite

0

Answer

Changing the plugs is fairly easy. Just follow the plug wires. remove and replace them one at a time. I did both plugs and wire on my daughter's car and it was a PITA. You're working by feel and not much space to work. I'm 5"6' and only weigh 120 and I had difficulty getting my arms in between the back of the engine and the firewall. If you're easily get discourage and not have a lot of patience then take it to the shop.

I have found a better way to take out back plugs on 3.1, remove coil plate, and coils. then you have more room to get at back plugs. coil plate 3 bolts,

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Where are the core plugs in a 1998 Chevrolet Malibu 3.1L?

They are located in the engine block and in the heads.


When should you change the spark plugs on a 2003 Chevrolet Malibu?

go by the recommended mileage in the scheduled maintanence section of the owner's manual.


How do you change the spark plugs on a 1997 Malibu three of the plugs face the firewall Is there a trick to getting these plugs out?

You rock the engine forward to gain access to the rear plugs.


How to locate spark plugs 2000 Chevy Malibu v6 engine?

how do i change spark plugs on a 2000 hevy Monte Carlo


How do you change spark plugs on a 2006 Chevy Malibu 3.5 v6?

To change the spark plugs on a 2006 Chevy Malibu with a 3.5 V6 engine, first, ensure the engine is cool and disconnect the battery. Remove the engine cover if applicable, then locate the spark plugs at the top of the engine. Using a spark plug socket, carefully unscrew and remove the old plugs, inspecting them for wear. Install the new plugs, ensuring they are properly gapped, and reassemble everything in reverse order, reconnecting the battery at the end.


How do you change the spark plugs on a 2000 Malibu?

To change the spark plugs on a 2000 Malibu, you need to get a spark plug socket with a u-joint in order to access the plugs on the firewall side of the engine. The plugs up front are easy to get at, and don't require anything special. Word of warning, if your Malibu has relitivley high mileage on it (80,000+) and it still has the factory plug wires, there is a good chance that they will break on you when you have to pry them off of the plugs, go ahead and replace the plug wires when you replace the plugs.


How to Change Spark plugs on 2001 V6 Malibu?

if coils are taken off,then you can access the back plugs ok! coils are on a plate with 3 bolts holding it on to engine. this is the best way to get at back plugs on v6.


Where are the freeze out plugs located on a 1998 Chevy Malibu?

The Malibu engine has several freeze plugs. They are on both sides of the block and designed to pop to keep the block from freezing.


How do you change spark plugs in 2002 Chevy Malibu 6 cylinder3.1?

I have a 2000 Malibu 3.1,and i found the best way to change the plugs, in front you have plenty of room, in back if you take the 3 bolts on coil plate out and disconnect wiring. the back plugs are easier to get to!! remove coils and plate, on lumina 3.1 you can tilt engine forward,but on Malibu 3.1 you cant move engine forward!! firing order is ---1-2-3-4-5-6-----135 in back 246 in front.


Where do you find the spark plugs on a 91 caprice?

There are four spark plugs on each side of your 1991 Chevrolet engine. The spark plugs will be near the bottom of the engine.


Why is the check engine light keeps flashing on 2006 Chevy Malibu?

There is an engine misfire, probably spark plugs issue.


Where are the engine drain and water jacket plugs located on a 1998 Chevy Malibu 3.1 engine?

down below on both sides of engine!!