0
Hi, you need a 25 torx and a spark plug socket w/ a 6 or 9" extension and a piece of tubing that is snug on the top of the plug. Remove the wire plug to the coil pack for each plug and remove the 2 #25 torx head bolts. Loosen the plug and with a piece of hose or tubing pull it out.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How many spark plugs do you need for a Chrysler lhs?
6 Its a V6
Where are spark plugs located on a 1997 Chrysler LHS?
Screwed into the heads.
Where are the spark plugs located at on a 1999 Chrysler LHS?
under the coil packs
Why would a 1997 Chrysler LHS be getting oil in three of the plugs?
The spark plug tubes need replaced.
Why would 1997 Chrysler LHS have oil in spark plugs?
Possible bad valve seals. I have had this problem with my 1999 and that is what I was told.
How do you change a spark plug in a 1999 Chrysler lhs 3.5 v6?
You need a spark plug socket with a rubber grip inside to lift the plug out.
What is the spark plug gap for a 1996 Chrysler LHS?
.035 in.
How do you change the spark plugs in a 1995 Chrysler LHS?
Using a torx head wrench, remove the two screws holding each individual coil to the top of the motor. Once removed, the coil comes straight up and off revealing the spark plug below. The engine has no spark plug wires (a good thing if you ask me). Removing the spark plugs are extremely easy to do!
What is the spark plug gap for a 1997 Chrysler lhs 3.5?
.035
What is spark plug gap for a 1994 Chrysler LHS 3.5L?
.035
What is the spark plug gap for a 1995 Chrysler LHS 3.5L?
.035 inch
What is the spark plug gap for a 1999 Chrysler LHS and can you use 4308 Bosch Platinium2?
0.50
