remove the coil pack first
underneath the engine cover there is a long black box about 2" wide held by three bolts the plugs are under that
take the old ones out and put new ones in :)
To change the glow plugs on a Citroen Xsara, first, ensure the engine is cool and disconnect the battery. Remove the engine cover if needed, then locate the glow plugs on the cylinder head. Use a suitable socket to unscrew and remove the old glow plugs, taking care not to damage the threads. Install the new glow plugs by hand to avoid cross-threading, then reconnect everything and the battery.
it screws out
how u do u remove a wheel bearing on a citroen xsara
Follow the plugwires and you are bound to find them. You have to look at an angle, because the engine is slightly tilted back. To ondo them you´ll need a fleksible socket.
To change the spark plugs in a Citroën Xsara Picasso, first, ensure the engine is cool and disconnect the battery. Remove the ignition coil or spark plug cover to access the plugs, then use a spark plug socket and ratchet to unscrew and remove the old plugs. Inspect the condition of the old plugs and replace them with new ones, ensuring they are properly gapped according to specifications. Finally, reassemble any components you removed and reconnect the battery before starting the engine.
you need to go to a garage or you could end up frying the spark plugs or something and you would cause more damage to it
Under the coil pack.
Remove bellhousing from citroen xsara picasso
From memory on my 1.8L Picasso Start off by disconnecting the battery following the special procedure The top of the engine is hidden by a plastic cover. The plastic cover is unfastened via three screws which need to be turned through 90 degrees. Then you have to detach the cables from and unscrew the coils (two bolts ?) This gives access to the spark plugs
One may want to enlist the help of a professional to change the front brake disc on a Citroen Xsara Picasso. It can be a tough job and dangerous if not done correctly.