To change the spark plugs in a Citroën Xsara Picasso, first, ensure the engine is cool and disconnect the battery. Remove the ignition coil or spark plug cover to access the plugs, then use a spark plug socket and ratchet to unscrew and remove the old plugs. Inspect the condition of the old plugs and replace them with new ones, ensuring they are properly gapped according to specifications. Finally, reassemble any components you removed and reconnect the battery before starting the engine.
underneath the engine cover there is a long black box about 2" wide held by three bolts the plugs are under that
remove the coil pack first
They are under the coil pack, you need to take off the black plastic cover to see them.
take the old ones out and put new ones in :)
From memory on my 1.8L Picasso Start off by disconnecting the battery following the special procedure The top of the engine is hidden by a plastic cover. The plastic cover is unfastened via three screws which need to be turned through 90 degrees. Then you have to detach the cables from and unscrew the coils (two bolts ?) This gives access to the spark plugs
it screws out
Under the coil pack.
you need to go to a garage or you could end up frying the spark plugs or something and you would cause more damage to it
Citroën Xsara Picasso was created in 1999.
Remove bellhousing from citroen xsara picasso
One may want to enlist the help of a professional to change the front brake disc on a Citroen Xsara Picasso. It can be a tough job and dangerous if not done correctly.