The speedo cluster comes out by removing the lower plastic (one 10mm bolt and 4 screws) under the steering column. Next remove plastic covering column (helps ease the removal of cluster). Remove 2 retaining screws on cluster cover and remove. Next remove 4 retaining screws on cluster and pull away enough to reach around back and pinch retainer on speedo cable to disconnect. This can be difficult as the cable may bind and the cluster will not pull out far enough to get your hand in to pinch the retainer. If this happens, push the cable thru from the firewall as best you can. It is tight. To remove wiring, push on clip of retainer and gently pull back till it's removed. Remember to replace with a head from the same configuation of truck. A 4 cyl will not work for a 6 cyl truck. As usual, a 4 runner head will fit a pickup providing they are compatible years. Removing dash pieces from a Toyota pickup is very straightforward. Either they are held with screws or clip retainers that require a sharp pull. good luck.
how to fix speedometer for Toyota mr2
It will change to the mileage on the new speedo.
how do you change front ring and pinion on 89 Toyota pickup
remove cluster fuse to reset cluster....if still not working properly replace cluster
To change the speedometer cable on a 1990 Toyota truck, disconnect the cable, feeding it through the grommet, then disconnect it from the transmission. The process can then be reversed with the new cable.
If both the speedometer and the odometer work on and off, I would blame the vehicle speed sensor. If only the speedometer is acting up, I would blame the cluster.
Remove the instrument cluster and take it to a speedometer repair shop. They'll fix the speedo and you can reinstall the whole cluster. Or, do a search on the internet for speedometer or instrument cluster repair. There are several sites that do this. Rick I'm a retired ASE Master/L-1 Technician. I still keep current with the latest automotive technology. Visit my blog for cool articles and TSB's: http://free-auto-repair-advice.blogspot.com
There is no easy way. The instrument cluster will have to be removed.
How hard is it to change the rear main seal in my 1992 toyota pickup , with the 3.0 V6
A 1999 Ram does not have a speedometer cable. The speed signal comes from the abs system.
how to change a toyota 4runner kickdown kabel
The legal method to change the KPH to MPH in a Renault Laguna would be to remove the speedometer instrument cluster and take it or ship it to an speedometer and instrument cluster service center where they can legally alter the MPH and KPH with all of the proper paperwork and documentation. Hope this helps!