the starter should be on the right side of the engine block there aretwo or three bolts going into the block then the starter should come down a little but on the front of the starter there is a nut holding on wires to the starter i think they are 10mm. once the bolts are out of the block and no wires are on the front of the starter it should come out. its a 10 minute job if that
A person an change the starter on a 2002 GMC Sierra 1500 by disconnecting the battery and removing the retaining bolts on the starter. The original starter is then disconnected from the wiring and a new starter reconnected.
the starter GMC Yukon?
The starter of the 1994 GMC Sierra 1500 pickup is located on the dashboard. It is usually attached by a small wire.
You put it where it belongs
The gap for spark plugs in a 96 GMC sierra is .60
The 1995 GMC Sierra doesn't have kingpins.
How do I change the low beam bulb in a gmc sierra 2005?
The knock sensor is on the starter side of the engine. It is abut half way between front and back.
Follow the positive battery cable (the big one); the starter will be at the end of it.
Starter solenoid? One top of starter--follow + battery cable
You will need to take out the parts of the ignition and put in new parts. It is usually best to trust a mechanic to do this for you.
The standard speaker size on a 1996 GMC Sierra truck is 9 inches. Larger speakers can be added but required the opening to be enlarged.