remove the felt lining in the trunk. this will allow you access to the bulbs.
What is the part number for the 2008 HHR tail light bulbs and backup light bulbs?
The # is 1157 bulbs.
You have to unbolt the entire tail lamp assembly to change the bulbs. Unbolt the tail lamps from inside the corners of the bed, replace the light bulbs, bolt the tail lamps back in place.
Well If you unscrew the taillight from the car take it off you can change you tail light bulbs
open your trunk to get access to your tail light, unscrew some plastic snap-on-screws to get to the panel that holds all your tail lights move the fabric uncling the panel CAREFULLY and change your burn bulbs
Replace the whole light assembly Their are no bulbs it is neon light
To change your Durango's tail light, first make sure to have a flat head screw driver and a new bulb. You will then open your trunk and remove the screws to the tail light, swap out the bulbs and replace the housing case.
Remove the bolts !
Remove the light assy then turn the bulbs countereclockwise to remove the bulbs.
Burnt fuse...the tail lights and dash lights run together. Replace the fuse and if it burns again, change tail light bulbs first (some may be bad even though they work) and then look for bad wiring if the bulbs haven't fixed it.
you need to remove the taillight assembly. you will see all the bulbs.
remove the torx screws that hold in place, remove the bulbs from sockets