Begin by removing the alternator tensioner bolt. Slide the alternator to the left. Remove the alternator belt. Reverse the process to install the new alternator belt.
how do adjust timing belt on a volvo 240 DL ?
how can i repair a wirie taht has been broken from alternator to wiring harness on 1990 volvo 240?
First you've got to loosen the tensioner pulley bolt. Loosen both bolts as usual on the alternator and that should give you the slack to take it off. If its already off then to put on a new one.
When working on anything electrical, a person should have a diagram. The diagram for the alternator wiring for a 1985 Volvo 240 can be found in its maintenance manual.
at least 50 A
The VR is on the back of the alternator.
There is abolt on the bottom of the alternator that holds the alternator to the engine. There is another bolt and bracket on the top that adjusts the belt tension. There is a ground wire, power wire from the starter and a wire that connects to the dash light. There are also one or two belts depending on the year and model of the car.
Worn brushes, bad Regulator, or Likely a bad connection or wiring.
bearing
met poep
About every 60,000 miles, depending on driving conditions.
Belt slipping and not turning water pump?