you have to replace the whole module if I am not mistaken, first remove the steering wheel cover and then there should be 2 pins you will have to get to and push simultaneously to remove
how to remove cover to replace ignition lock cylinder and what type of tools do i need
To replace the brake light switch on a 1995 GMC Sierra 1500, the steering wheel will have to be dismantled until the brake light switch is reached. The switch is changed by unplugging it and plugging in a new one. There are screws holding the switch in place.
I have a 1978 Sierra 1500 and mine is near the secondary tank, passenger side of the truck.
how do you change ash tray light bulb in a 1998 GMC Sierra 1500
A person an change the starter on a 2002 GMC Sierra 1500 by disconnecting the battery and removing the retaining bolts on the starter. The original starter is then disconnected from the wiring and a new starter reconnected.
The circuit breaker for the headlights is intergrated with the headlight switch.
You don't From, Gabe Higbee
6 qts with filter change.
Do you take the steering wheel off to get to the ignition
1. Take the three bolts that hold the headlight/ blinker lens assembly off. 2. Pull kind of hard straight out. There is a clip that should release. If it does not realease then break it. 3. Change bulb.
gmc 1500 sierra was fuel injected in '92
The 2007 GMC Sierra-1500 has 16 valves.