open boot/trunk undo 2 screws on top of rear lens and slide out replace bulbs and refit
If all that is working it might be a short in you wiring. I would recomend checking by the light socket.
Where is the brake light fuse found on a 1996 dodge grandcaravan
The 1996 GMC Yukon brake lights work by receiving power from the brake light relay switch. The brake light relay switch is connected to the brake pedal.
from inside the trunk you can dislodge the tailight lenses.... the rest is simple
When you open the hatch back there are two screws, take that off and then pop off the light cover and it is there.
where is the brake light switch for 1996 Oldsmobile cutlas supreme
The brake warning light
I assume you only need to change the bulbs. Go into the trunk and look up. You should see the wires leading to the mounting point for the third brake light, you candisconnect the connectors and then change the bulbs this way.
It is underneath the Brake Pedal.It's mounted to and right above the brake pedal.
to hard.. get a mechanic to do it.......
Above the brake pedal where the master cylinder is attached to the brake pedal assembly.
First check the brake light fuse, if good, then test the brake light switch.