In the lower right-hand corner of the stereo, there is a switch with a "down" arrow on the left, and an "up" arrow on the right. Inscribed just above the "down" arrow is a barely legible "HR" for hour, and inscribed above the "up" arrow, "MIN" for minute. To set the clock: [1] Put the key in the ignition, and turn to "ACC" (1st click) or "ON" (2nd click). [2] Turn the stereo OFF (if it's ON) by pushing the power/volume knob in the upper left-hand corner of the stereo, so the clock is being displayed. [3] Press and hold the "up" arrow button for 3 seconds, at which time you will hear a beep, and the minutes will start advancing. At this point you can advance the minutes with the "up" arrow button ("MIN"), and advance the hours with the "down" arrow button ("HR"). [4] When you have set the desired time, turn the stereo back ON, and the time will be latched in.
How do I change the clock setting on a 1997 Chevy Lumina with a CD stereo system?
yes
Remove the cover from your 2001 Chevy Silverado stereo. Remove the stereo retaining bolts. Remove the wiring harness and the antenna cable from the back of the stereo.
Remove the decorative cover from your 2006 Chevy Express stereo. Remove the stereo retaining screws. The stereo will slide out. Remove the wiring harness and the antenna cable from the back of the stereo.
The wiring of a stereo is connected to the audio inputs. This is standard in a Chevy Blazer and other cars.
what are the stereo wire color codes for a 2002 Chevy impala LS
Remove the decorative cover to your 2001 Chevy Lumina stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness. Remove the antenna cable.
No.
black
the stereo in my 2000 Chevy Malibu is in lock mode and i don't know the codes, how do i unlock it?
You can find a stereo wiring diagram for your 1990 Chevy Cheyenne 2500 at most Chevrolet dealerships. The stereo wiring diagram will be in Chevrolet service manuals at your local library.
Remove the decorative stereo retaining cover. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness and the antenna cable.