How do you change the clock on an HP Officejet 5510 All-In-One?

Answer 1

Install the HP Director software... http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=311255&lc=en&cc=us&dlc=en?=en&cc=us Normally the computer software sets the date and time automatically. http://h10032.www1.hp.com/ctg/Manual/bpu72474.pdf page 50-51 set the date and time You can set the date and time from the front panel. When a fax is transmitted, the current date and time are printed along with the fax header. The date and time format is based upon the language and country/region setting. Normally the computer software sets the date and time automatically. Note: If your HP Officejet loses power for more than 72 hours, you will need to reset the date and time. 1 Press Setup. 2 Press 3, then press 1. This selects Basic Fax Setup and then selects Date and Time. 3 Enter the month, day, and year (last two digits only) by pressing the appropriate number on the keypad. Depending on your country/region setting, you might enter the date in a different order. The underline cursor presented initially beneath the first digit advances automatically to each digit each time you press a button. The time prompt automatically appears after you enter the last digit of the date. 4 Enter the hours and minutes. The AM/PM prompt automatically appears after the last digit of the time is entered if your time is displayed in the 12-hour format. 5 If prompted, press 1 for AM or 2 for PM. The new date and time settings appear on the front panel. reference guide use the fax features 51 fax set the paper size You can select the paper size for received faxes. The paper size selected should match what is loaded in your input tray. Faxes can be printed on letter, A4, or legal paper only. Note: If an incorrect paper size is loaded in the input tray when a fax is received, the fax will not print. Load letter, A4, or legal paper, and then press OK to print the fax. 1 Press Setup. 2 Press 3, then press 5. This selects Basic Fax Setup and then Fax Paper Size. 3 Press to highlight an option, and then press OK.

Answer 2

Install the HP Director software... http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=311255&lc=en&cc=us&dlc=en〈=en&cc=us Normally the computer software sets the date and time automatically. http://h10032.www1.hp.com/ctg/Manual/bpu72474.pdf page 50-51 set the date and time You can set the date and time from the front panel. When a fax is transmitted, the current date and time are printed along with the fax header. The date and time format is based upon the language and country/region setting. Normally the computer software sets the date and time automatically. Note: If your HP Officejet loses power for more than 72 hours, you will need to reset the date and time. 1 Press Setup. 2 Press 3, then press 1. This selects Basic Fax Setup and then selects Date and Time. 3 Enter the month, day, and year (last two digits only) by pressing the appropriate number on the keypad. Depending on your country/region setting, you might enter the date in a different order. The underline cursor presented initially beneath the first digit advances automatically to each digit each time you press a button. The time prompt automatically appears after you enter the last digit of the date. 4 Enter the hours and minutes. The AM/PM prompt automatically appears after the last digit of the time is entered if your time is displayed in the 12-hour format. 5 If prompted, press 1 for AM or 2 for PM. The new date and time settings appear on the front panel. reference guide use the fax features 51 fax set the paper size You can select the paper size for received faxes. The paper size selected should match what is loaded in your input tray. Faxes can be printed on letter, A4, or legal paper only. Note: If an incorrect paper size is loaded in the input tray when a fax is received, the fax will not print. Load letter, A4, or legal paper, and then press OK to print the fax. 1 Press Setup. 2 Press 3, then press 5. This selects Basic Fax Setup and then Fax Paper Size. 3 Press to highlight an option, and then press OK.