on the 89 the arm has one wire for the cruise, this connects under the dash and must be disconnected and fished out of the steering column, as for the arm itself, it should just pull out of the column
There is no isolated fuse for the cruise control. It all runs off the 20A gauges fuse. If you are having trouble with the cruise control I would check the Cruise Control Module or the Cruise control Servo. What symptom is occurring?
Hi: Have you an elctrical diagram for the cruise control of a Citation GMC 1985 (Vandura). Regards.
Change the cruise control switch.
I have an '86 Chevy S-10. The wiper, blinker, dimmer, and cruise control are all in one switch. The cruise wires are threaded through the hollow shaft of the blinker arm and come out through a slot just inside the column cover. I recently replaced this switch because over along time of using the blinker, dimmer, and wipers, the wires had frayed through where the cruise wires come out of the blinker arm. Have a friend who is good at mechanics inspect the wiring and see if this is the problem. Replacing my blinker arm from a junk yard will solve my problem for a little while.
possible the guy that did the oil change bumped a vaccum hose on the cruise control canister and broke it or knocked it off.
look on the end of the blinker
The most probable cause for your malfunctioning cruise control is a blown fuse. The fuse might have blown while you were changing your switch. The cruise control fuse can be found in the fuse box.
Cruise control is an accessory.
It is possible to convert a car without cruise control to have cruise control. Many auto parts stores sell kits which will install cruise control in a vehicle.
There are several ways to fix the cruise control on your Mercedes-Benz depending on the problem with the cruise control. Make sure the fuse for the cruise control is not blown.
2004 sebring convertable cruise control not working - what to do?
If the cruise control on your 1987 300ZX does not work, you might have an issue with the cruise control fuse or wiring. You could also have a problem with the switch that turns the cruise control on and off.