You must remove the cluster (the part were your gauges are) this comes out as one unit. The pain will be reaching behind it and unplugging the comnnecter attaching it will be twice as tedious! but everything else is relitivley easy. You must then disassemble the cluster carefully to expose the bulbs. I recomend you do this in your house so that you don't loose the pieces! the bulbs are cheap and can be found at any auto prarts store. After replacing the bulbs assemble the cluster and reattach it to the car. NOTE: one special tool needed will be a stubby or short handled screwdriver to remove the screws that hold down the bezel in front tof the cluster. about 2" in length!
where does the yellow wire with a black stripe on it connect for dimmer lights,panel lights,and gear shift lights,for a 2000 Mitsubishi galant
If dome lights and sunroof of a Mitsubishi Galant are not working, it is probably due to blown fuse. It is time to replace old ones.
i am having the same problem with my galant.
yes
Check the fuse or the wiring
You cannot turn off the Daytime running lights on a Mitsubishi Galant without cutting the wire. This is because the car is set up to have these lights on at all times during operation.
warning lights
I have changed the headlight but I need to adjust it as the lights don't hit the road
check high/low beam relay and switch
== ==
That lights means that your coolant is low.
you have to remove the cover of the dashboard to replace the light bulbs