To replace the instrument panel lights in a 2002 Mitsubishi Galant, first, disconnect the negative battery terminal for safety. Remove the screws securing the instrument panel bezel and carefully pull it away to access the gauge cluster. Unscrew the cluster from the dashboard, then twist the bulb sockets counterclockwise to remove them and replace the old bulbs with new ones. Reassemble the cluster, bezel, and reconnect the battery.
If dome lights and sunroof of a Mitsubishi Galant are not working, it is probably due to blown fuse. It is time to replace old ones.
where does the yellow wire with a black stripe on it connect for dimmer lights,panel lights,and gear shift lights,for a 2000 Mitsubishi galant
i am having the same problem with my galant.
There is a small plastic piece that rotts away after years of use. Any mechanic can replace it in 15 min.
To change the speedometer light bulbs in a 1991 Mitsubishi Galant, first disconnect the negative battery terminal for safety. Remove the dashboard trim and unscrew the instrument cluster to access the bulbs. Carefully twist and pull out the faulty bulbs, then replace them with new ones, ensuring they are securely fitted. Finally, reassemble the cluster and trim, reconnect the battery, and test the lights.
Yes, the 2000 Mitsubishi Galant does have shift bezel lights. These lights illuminate the area around the gear shift, making it easier to see and operate the transmission controls, especially in low-light conditions. If the lights are not functioning, it may be due to a blown fuse or a burned-out bulb.
You cannot turn off the Daytime running lights on a Mitsubishi Galant without cutting the wire. This is because the car is set up to have these lights on at all times during operation.
turn the dimmer switch up.
I have changed the headlight but I need to adjust it as the lights don't hit the road
check high/low beam relay and switch
To replace the dashboard lights on a 2006 Mitsubishi Lancer, first, disconnect the negative battery terminal to ensure safety. Remove the dashboard panel by unscrewing the necessary screws and gently prying it off. Locate the burned-out bulbs in the instrument cluster, twist them counterclockwise to remove, and replace them with new bulbs. Finally, reassemble the dashboard, reconnect the battery, and test the lights to ensure they work properly.
you take apart the dash and get to the instrument panel. then you take the instrument panel out and on the back of the panel you'll will see the lights