Want this question answered?
if it
To install the Mitsubishi Eclipse driver mirror, you will need to remove the interior door panel on the driver's side. Then, remove the cover for the mirror screws. Remove the screws and wiring and remove the old mirror. Replace the wiring and screws as you add the new mirror to the car. Then place the cover and the door panel back on the vehicle.
amvot nimo
YES IT HAS A PLUG
On the inside of the door, where the mirror is mounted, there is a black triangular plastic cover. Gently pry off the cover and you will find three nuts inside which hold the mirror to the car. loosen these nuts, and if electric mirrors, disconnect the plug. You will have to pull the door panel back alittle at the top to replug, as there is not a-lot of slack in the cable. replace the mirror through the same holes and reattach nuts.
You have to remove the inside door panel then you can see the holding assembly
You replace them by first putting the mirror in the down position. Now look between the mirror and you will see two tabs(the same color as your truck) take a screw driver and lift them up. This will remove the painted part of the mirror. Replace the bulb and replace the painted part of the mirror and you're done. Bulb type: #906/921
To remove the rear view mirror off a 2000 Mitsubishi Mirage first pop off the plastic cover place on the body of the mirror. Than proceed to unscrew the mounting screws.
It is possible if there is a mirror in the car. If the driver can see your eyes through the mirror, then you can also see the eyes of the driver.
how to install Ford Ranger Driver Side View Mirror
it is in driver mirror
Yes, you do have to remove the door panel on a 99 Lumina in order to change the driver's side mirror. To do this you will have to remove the screws holding the panel in place. There will also be clips that can be removed. Pull the door panel carefully away once these items are removed.