The following was sourced and paraphrased from Haynes Repair Manual for 1987 - 1996 Dodge Dakotas.
For 4wd models; The hub and bearing assembly is a sealed unit and is not serviceable. If it is found to be defective, it must be replaced as a unit:
For 2wd models using repackable, tapered-type bearings and cotter pin/nut lock type retainers:
The spindle nut is to be tightened in the following steps:
howdo you change the front axel of a dodge Dakota 2000 4x4
They are a sealed bearing and are not "packable".
youll most likely have to buy the whole hub assembly. I had to do that to my 94 dodge dakota.
the front wheel bearings are a sealed unit, requiring a front hub assembly. when i bought mine it was a dealer item only
1992 dodge dakotas do not have front coil springs, they have torsion bars instead.
Rear wheel abs was standard equipment on a 2007 Dodge Dakota. Four wheel abs was optional. If you have wiring going to the front wheel bearings for sensors, it is four wheel abs.
WHAT YEAR IS IT? is it four wheel drive, two wheel drive?
front or rear wheel drive?
The front bearings on Dodge Rams after 1998 are all sealed and non serviceable. If you have an older Ram with serviceable bearing, every 50000
you have to remove trans.after trans is removed remove tork.conv.check bushing in front pump you will find that it is bad
they are in front and after your cat
No, it is a sealed unit.