answersLogoWhite

0

you need to take the wheel off, then remove the caliper from the knuckle once you have the calpier removed with a large pair of channel locks compress the caliper piston with the old pad still in place , remove the old rotor which should just slide off replace it with the new one,replace the pads in the compressed caliper, reinstall the caliper put the wheel back on and presto you are finished but before you put the car in any gear make sure you pump the brake pedal to seat the brakes again because remember you compressed the piston . good luck be safe use jack stands and block your wheels get a manual also it helps

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Change front brake pads on a 2002 Nissan Sentra?

How do you change brake pads on a 2002 Nissan Sentra? How do you change brake pads on a 2002 Nissan Sentra? How do you change brake pads on a 2002 Nissan Sentra?


Where is the brake light switch located on a 1993 Nissan Sentra?

The brake light switch is located above the brake pedal on a 1993 Nissan Sentra. To reach the switch the driver's door needs to be opened.


Why is your parking brake engaged after changing the rear rotors on a 1998 sentra?

You have not set and adjusted them correctly.


How do you change front brake pads on 2008 Nissan Sentra?

it the same on all brakes,the only difference is tork bolts. 65;


1997 Nissan sentra brake lights are not working?

the brake light driver side not working


How do you remove brake drums on a 1989 Nissan sentra?

very carefully :)


How do you adjust the parking brake on a 1992 Nissan sentra?

Tighten it up!!


How do you change front brake rotors on a 1998 Hyundai Accent?

Change front brake rotors on a 1998 Hyundai Accent?


Brake light on dash kepts blinking on 1998 Nissan sentra?

brake light on dash blinking


Where is the passing gear connection located on Nissan Sentra?

to the right of the brake pedal


Are the front rotors on a 1997 Nissan Sentra pressed on?

If you are talking about brake rotors. No they are not pressed on. I have 97 Sentra GXE. I have pulled them off had them spun once and then the next time (30,000 miles later) I replaced them with RayBestos. If you are going with aftermarket brand brakes I recommend RayBestos. The house brands aren't the quality that OEM or RayBestos are. There are a lot of really nice premium brands out there but you will pay a premium price. A Buddy's 97 Honda Accord's brake rotors are one unit with the wheel hub assembly. One of the worste for maintenance designs ever. But my Sentra was nothing like that. Hope that helps.


When you brake the car starts to vibreat?

Change the brake rotors