Remove the wheel,remove the brake caliper, it may have a clip on the lug nut stud, just grab it with needle nose plires and twist it till it breaks off and then the rotor should just fall off.
Remove the tire and wheel from your 1999 Chevy Cavalier. Remove the brake spring and the caliper. The brake pads will come off. Tap on the rotor with a hammer or mallet. The rotor will slide off. Reverse the process to install the new brakes and rotor.
There is no distributor cap, only a ciol pack that the plug wires go to
The front hub takes a 35mm deep socket. (It is not necessary to remove the hub to change the rotor.)
The answer and dimensions are stamped in the stock brake rotor of your vehicle.
yes
how to change rotor front disc on 2006 sprinter
if its when you are breaking it is possible it could be a rotor if you hear like a roaring or grinding noise coming from that side also could be a wheel bearing
Pull the wheel, pull the caliper and the rotor comes right off. You may have to tap the back side of it to loosen it up.
You will need to remove the tire and wheel from your 1995 Chevy Cheyenne. Remove the brake assembly. Tap on the rotor with a hammer or mallet. The brake rotor will slide off. Reverse the process to install the new brake rotor.
warped rotor
The front brake rotor, on a 2004 Chevrolet Colorado, can be removed by first removing the wheel. Next, remove the brakes. The rotor will slide off
Remove the tire and wheel from your 1995 Chevy. Remove the brake assembly. Tap on the brake rotor with a mallet or hammer. The brake rotor will slide off.