1.- Remove the rear part of the console. There are 2 bolts inside of the box compartment, they are under a felt. 2. Remove the black plastic trim around the shift. It is clamped. You can use your fingers tips by inserting them around the inside cut out of the trim, rear side, lift the trim. 3. Remove a screw that holds the front part of the console at the drivers side. It is located under the steering wheel. 4. Then strecht out side way this front console as much as you can in oder to have space and reach the bulb. You may also have to remove some of the carpet. See picture You can not see the bulb, so you have to use your fingers to fill it by following the wires up to the bulb socket. 5. Once you have touch the socket, hold it with you fingers and make a 1/4 turn to loose it and then bring it out to remove the bulb.
it doesnt have one,
Will a 2.2 engine out of a 1996 Toyota Camry fit in a 1997 Toyota Camry? Yes it will fit you just have to change from distributor to coil packs it will fit because i have a 96 Toyota camry with a 2.2L engine from a 99 model.
Every 60,000 miles.
No, you can't.
Each 5k miles.
dose 1997 and 1999 of Toyota Camry has any difference
Can a put an engine out of a 1996 toyota camry into a 1997 toyota camry?
Buy a Haynes shop manual for 1997-2001 Toyota Camrys. They're about $15.
If you assume that transmission is in a good condition, the only thing which can do to that is neutral safety switch.
Where is the oil drain plug on a 1997 Toyota Camry V-6 located?
No, it is completely different belt, it is longer too.
1997 and 1998 will fit on 1999. 1996 is a different model.