How do you change the headlight bulb on a 2000 Subaru Outback?

Answer 1

Look behind the headlight housing and you would find a light grey color cap. Facing the vehicle, hold the cap and turn it anti-clockwise gently but sturdly for about 20-30 degree angle. Once you do that it will pry out and you can change the bulb. I believe the low bean is a H1 55w 12v bulb, which is the top one. If you look carefully - you will find a metal pin on the right side which is holding the bulb in place. Press the metal clip inwards, push down and slowly pry out. Remove the wire connections - remember the location - I believe white wire is for the bulb. CAUTION: Never touch the glass portion of the new bulb. If you do - wipe it clean with a soft cloth - wait 10-15 min for the moisture on the bulb to evaporate and then replace the bulb. When you touch the glass on bulb with your fingers - your finger prints contains moisture that sticks to the bulb and when you turn it on - the instant heat produced will break the bulb glass. Hope this helps.