first remove the connector, it's really on there, I used a pry tool. then remove the dust cover (rubber surround on the back of the headlight assembly). this will expose a clip assembly, push in, push to the side and release. thebulb can be removed after that. The slit for the new bulb is very narrow. I had to remove the bumper to get it right. It's not that bad to do. aprox 5 clips along the bottom and 2 pressure fit grommets and two #2 Philips clips (lefty loosy, right tighty DO NOT STRIP or you'll have to drill). theres 4 more of the Philips clips in the wheel well and a 10mm bolt on each side. 6 clips along the top (total of 4 key clips at the bottom of the radiator covers. lift up and pull) this will expose 2 more 10 mm bolts. And that's it. Pull down at the corners (ie wheel wells) to release clips on each side and then pull the bumper assembly forward and you're done. With one guy shouldn't be longer than 20min(first time, ballpark 45 min)
The 2006 Mitsubishi Outlander has 16 valves.
The 2006 Mitsubishi Outlander has a 5-speed manual.
The 2006 Mitsubishi Outlander is a gas-powered vehicle.
The 2006 Mitsubishi Outlander has an inline 4 engine.
The height of the 2006 Mitsubishi Outlander is 5 ft. 6.3 in. (66.3 in.).
The maximum payload of the 2006 Mitsubishi Outlander is 970 lbs..
The 2006 Mitsubishi Outlander's turning circle is 37.4 ft..
The 2006 Mitsubishi Outlander has a drag coefficient of 0.43 Cd.
The 2006 Mitsubishi Outlander runs on regular unleaded.
The 2006 Mitsubishi Outlander has single overhead cam (SOHC).
The curb weight of the 2006 Mitsubishi Outlander is 3241 lbs..
The 2006 Mitsubishi Outlander is 14 ft. 11 in. (179 in.) long.