Ok step one remove the two screws on the marker light on the grill both left/right side.Next remove all the screws across the top of the grill with the hood open and there are three( in the center of the grill going on recall).Now there are 2 screws behind the now remove marker lights on both the lhs/rhs remove those.The grill will pull forward and lay to the side.There are 4 screws holding the chrome metal ring around the headlight itself remove those.Now remove the plastic plug inside at the backside of the headlight.Remove headlight.Reinstall is the reverse of this.
The Mazda B2200 truck body did not change much, if at all between 1986 and 1993. There should be no differences in the shape of the engine compartment. -Kyrasis6 Owner of Mazdatruckin.com
For the 1994 model (B3000), you can't change just the bulb. You have to change the headlight assembly.
Below are attached links discussing the horn on your truck.
Get a manual on your truck from DISCOUNTAUTOREPAIRMANUALS.COM They are about $9
I have a 92 b2200 with 325k miles. Ibought it brand new.
At the top of the clutch pedal in the cab of the truck.
The torque specs for the cylinder head on a b2200 are 59-64 ft lbs (cold).
It would depend on the truck's condition. The B2200 short bed truck in excellent condition would be about $1,650. The B2200 long bed would be around $1,750 in excellent condition.
Look under vehicle follow fuel line from tank
All the 1986-1993 mazda b series trucks were manufactured in japan.By the way great built trucks for that matter.
Gap is 0.031 or 31thousandths. your truck has the 2184 cubic inch engine.
The amount of liability a driver has to carry, is decided by the laws of the state in which they live.