0
my 86 is about the same and i took out the screws of the glove box and started on the dash board screws then loosened the bolts on fire wall which is the heater core back, the bolts on the right i had to cut off with a mider saw very rusty. take off the cable under the hood left side and pull heater core box out disemble and put in a new core for 26 dollars and redoo.
What else can I help you with?
How do you change heater core in 1999 ford f 150?
heater core is in back of the glove box
Where is the heater core in a 1998 Ford F-150?
behind the dash passenger side
How do you change the heater core in a 87 Ford F-150?
To change the heater core in a 87 ford f150 is easy. Just remove the glove box and then behind it there is 7 bolts. After you remove the 7 bolts then just remove the cover and behind it is the heater core. By far the easiest heater core I ever changed.
What causes the heater to blow antifreeze in to the cab of a 1998 ford f-150?
if antifreez is blowing into cab, u need to replace the heater core the core has a hole in it. thses are not repairable and they are cheap to buy
What is the easiest way to change a heater core on a 1998 Ford F-150 pickup?
Pay someone else. This is about a ten - 12 hour job and requires taking the entire dash assembly out.
How do you change the heater core in your 1998 Ford F-150 with a 4-2 V6?
Step one: Remove the dash, completely. Step two: remove the top half of the heater case. Step three: remove the heater hoses. Step four: replace the heater core, and Step five: reassemble everything. Good luck with step one.
How do you change a heater core on a 1985 Ford f 150?
Remove the inside cover of your glove box, 4 or 5 screws, then you will be at heater core cover, remove 7 screws from cover, and if you have disconnected your heater hoses, the heater core will pull right out. Just did mine thanksgiving day. 20 minute job
Is changing the heater core in a 1986 ford f-250 done the same way as in 1986 f-150?
To change out the heater-core in a 1986 F-150, you must access the old heater-core through the glove box. You must remove the glove box by removing the screws that hold it in. Once this is accomplished, you must loosen the clamps on the hoses that are connected to the old heater-core unit. Then remove the hoses from the old heater-core and slide the old heater-core out through the opening where the glove box use to be. Install the new one using these instructions in reverse! Presto...installed! Mechanic Man
Where is the heater control valve 1998 ford f-150?
heater is not getting hot
2001 ford f- 150 supercrew heater core installation?
Bolt the heater core into its proper position. There are four retaining bolts. Connect the water lines to the heater core. Fill the cooling system with coolant.
How do you change heater core in 1990 econoline 150?
you dont!you just connect both the hoses together.and wear a gloves hat and a heavy jacket!
What needs repaired when a 1998 F-150 heater fan only operates on high?
Change the motor resistor under the dash first.
