answersLogoWhite

0

Bolt the heater core into its proper position. There are four retaining bolts. Connect the water lines to the heater core. Fill the cooling system with coolant.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

Where is the heater core on a 2001 mercury villager?

mercury villager heater core 2001


Replacing heater core on 2001 cavilair?

Replacing heater core on a 2001 chevy,cavaliar.


Installation of a heater core in a 1987 Chevrolet pu?

Drain the radiator. disconnect the heater hoses as they go through the firewall. From inside of the cab, remove the heater core housing, then the core. Reverse the procedure to finish the installation.


How do you replace a heater core in a 2001 Chevrolet Blazer?

how do i replace a heater core in a 2001 Chevrolet blazer


Instructions to remove heater core on 2001 Ford Expedition?

how to remove the lines from the heater core on a 2001 expedition


How do you install the heater core on a 2001 Chrysler Town and Country van?

how do i replace a front heater core, back heater core, and a heater motor in a 2001 Chrysler town and country? need a detailed description.


Can improper installation of a heater core cause a blown head gasket?

No


Where is the heater core on a 2001 Jeep Cherokee?

The heater core is inside the hvac housing behind the dash.


Where is the heater core in a 2001 Chrysler Town and Country?

The heater core is inside the hvac housing under the dash.


How do you replace a 2001 ford focus heater core?

You have to take half the car apart to replace the heater core


How much does a heater core cost for a 1997 Chevy S-10?

The heater core itself, should be under $50. Installation aprox $300 to $400.


How hard to install heater core on 2001 dodge 3500 w cummins?

Remove the heater-A/C housing from the vehicle. Refer to Housing Assembly HVAC/ Service and Repair/ Procedures. Remove the screws and retainers that secure the heater core to the heater-A/C housing. Lift the heater core straight up and out of the heater-A/C housing. INSTALLATION Lower the heater core into the heater-A/C housing. Position the retainers over the heater core tubes. Install and tighten the screws that secure the heater core and retainers to the heater-A/C housing. Tighten the screws to 2.2 Nm (20 in. lbs.) . Reinstall the heater-A/C housing in the vehicle Refer to Housing Assembly HVAC/ Service and Repair/ Procedures.